danford1;n82733 said:I'm resurrecting this old thread as I also want this exact answer. Will SPI epoxy mixed 1:1:1 as a sealer fill 400 grit sand scratches?
I'm sanding down 3 week old SPI epoxy and will seal then paint.
Thanks
Danford1
danford1;n82747 said:Ok so if I mixed 1:1:30% and I wanted about a half a gallon sprayable, then I would mix 28 oz part A 28 oz part B then 8.4 oz of reducer. Is that correct?
Danford1
jtfx6552;n82748 said:That's my understanding, but I'm looking forward to what the experts say.
danford1;n82747 said:Ok so if I mixed 1:1:30% and I wanted about a half a gallon sprayable, then I would mix 28 oz part A 28 oz part B then 8.4 oz of reducer. Is that correct?
Danford1
Sorry if I made it look more complicated than it really is, but the fact is that without an understanding of arithmetic, the lines on the cup or stick might not be helpful.DATEC;n82752 said:WOW that is some serious math , I would say get a measuring stick or a glass mixing beaker and do it that way, much faster and no screw-ups.
crashtech;n82768 said:Sorry if I made it look more complicated than it really is, but the fact is that without an understanding of arithmetic, the lines on the cup or stick might not be helpful.