AAE
Learner
This is why Barry won't let me be on the techline. All of my suggestions aren't helpful.I do.
This is why Barry won't let me be on the techline. All of my suggestions aren't helpful.I do.
I bet there's dried buildup in the tip. Try cleaning the tip between coats.
Has to do with one of the types of zinc used in the formula, that's easy to fix, but I want the protection.
Also, pug tips or internal screens will make worse then primers that don't use this type of zinc.
Again, the "slower is faster" mantra proves itself.After reading all the posts I realized my process is different than most. I only mix one cup of 2k primer at a time while spraying.
Rinse the gun with reducer and wipe tip clean after first coat so nothing is sitting in the cup or gun during flash time.