76 K5 Blazer

dhutton01

dhutton01

Promoted Users
Been plugging away on this for a couple of months. Owner is a neighbor so he needs to be happy. Had quite a bit of rust where the cap sits on the bed, the rockers, lower quarters and rear lower fenders. Color selection was chaotic. :) Finally settled on Kindig’s Modern Classik Bad Blood and No Strings White. These two tone jobs are a lot of work. Hope to get doors and fenders in color in the next couple of days. Then the hood and top.
89FB1576-CC1E-4077-AB5B-6E934A8D3B29.jpeg
ECB010C8-1226-48FE-B232-DC90BAE91FE9.jpeg
181304BC-DC9F-42ED-9469-B31407793DF7.jpeg
386EEAFD-8C98-4A10-8151-92F5995E7C3A.jpeg
79531B13-31F8-4805-BE06-4B700972DE30.jpeg
F3B5A356-A6BF-4486-96DC-44D4B42889A1.jpeg
70888E7E-6119-42A5-8D4F-E6CC74D69FEB.jpeg

8924E800-5C3D-48A7-A6AE-7397B0BF9ECA.jpeg


Don
 
Last edited:
Very nice, did you fix those bed sides or get different ones? I’m elbow deep in 2 1st gen blazers right now…..
 
Today I reaffirmed my backyard hack status and used my Sata 2.5 nozzle poly gun to spray Universal instead of my Sata 5500. :D. I was able to figure out what was going on before going too far. Used masking tape to pull most of the runs. Should be plenty of material to cut and buff. :D. I just hope it doesn’t solvent pop on me.

Don
 
dhutton01 said:
Today I reaffirmed my backyard hack status and used my Sata 2.5 nozzle poly gun to spray Universal instead of my Sata 5500. :D. I was able to figure out what was going on before going too far. Used masking tape to pull most of the runs. Should be plenty of material to cut and buff. :D. I just hope it doesn’t solvent pop on me.

Don
Click to expand...
Hanging curtains is what I was taught to call it...happens
 
dhutton01 said:
Today I reaffirmed my backyard hack status and used my Sata 2.5 nozzle poly gun to spray Universal instead of my Sata 5500. :D. I was able to figure out what was going on before going too far. Used masking tape to pull most of the runs. Should be plenty of material to cut and buff. :D. I just hope it doesn’t solvent pop on me.

Don
Click to expand...

" used masking tape to pull most of the runs"

This sounds like a Pro tip.
Can you explain how you are using masking tape to pull runs?

Thank you,
 
MJM said:
" used masking tape to pull most of the runs"

This sounds like a Pro tip.
Can you explain how you are using masking tape to pull runs?

Thank you,
Click to expand...
From the man himself. Where I first heard of it… :)

Tape out a run.

I get this call a lot, first coat of clear and I have a run. This is the one area if a painter has never taped out a run before, it is worth the time on a scrap fender to practice doing, as its is a money maker when you have the procedure down--I'm an expert on runs, believe me, so I'm really...
www.spiuserforum.com

Don
 
You must log in or register to reply here.
Back
Top