I’m currently buffing Universal clear that has sat a month. Laid 3 coats, hit it with 800 and then another 3.
After it cured I block sanded 1000 dry, 1500 dry, 2000 wet, 2500 wet and 3000 wet.
I’m using a Flex 3403 and Lake County 6” wool pad with 3D ACA 500. Speed recommendation on the ACA 500 is 1000 rpm which is a 1 setting on the flex but I’ve heard from Barry and others to step up to a 3 or 4 speed.
After the wool I’m using a black hex logic pad and 3D 520 polishing. I’m still seeing straight line scratches.
Do I need to kick the speed up on the wool pad to 3 or 4 to get those scratches out or go back to 1000 and sand again?
Thanks.
After it cured I block sanded 1000 dry, 1500 dry, 2000 wet, 2500 wet and 3000 wet.
I’m using a Flex 3403 and Lake County 6” wool pad with 3D ACA 500. Speed recommendation on the ACA 500 is 1000 rpm which is a 1 setting on the flex but I’ve heard from Barry and others to step up to a 3 or 4 speed.
After the wool I’m using a black hex logic pad and 3D 520 polishing. I’m still seeing straight line scratches.
Do I need to kick the speed up on the wool pad to 3 or 4 to get those scratches out or go back to 1000 and sand again?
Thanks.