S
SilentLlama
Hey everyone,
I just finished block sanding the 2k high build primer on my truck at 120 grit.
I sanded through to bare metal in a few spots.
It could probably use another round of 2k high build and blocking but I think its satisfactorily straight.
So what I am wondering is what I should do to prepare for basecoat?
Should I spray a coat or two of epoxy and then sand that up to 600 grit (its a metallic paint btw)
Or should I seal the bare metal with epoxy then spray another round of surfacer, sand that to 400 grit, and spray a reduced epoxy as a sealer a few hours before spraying the basecoat?
Or something else entirely?
Thanks in advance!
I just finished block sanding the 2k high build primer on my truck at 120 grit.
I sanded through to bare metal in a few spots.
It could probably use another round of 2k high build and blocking but I think its satisfactorily straight.
So what I am wondering is what I should do to prepare for basecoat?
Should I spray a coat or two of epoxy and then sand that up to 600 grit (its a metallic paint btw)
Or should I seal the bare metal with epoxy then spray another round of surfacer, sand that to 400 grit, and spray a reduced epoxy as a sealer a few hours before spraying the basecoat?
Or something else entirely?
Thanks in advance!