If you have 3 layers of clear under it, be careful, but flatten it with 1500 grit paper while staying off the edges, then shoot more clear. It shouldn't be a problem.Thanks guys. It showed up on my last layer of clear (4th layer). So I should be able to apply the sanding methods above and get it to smooth out.
Yup I’ve done it that way with success before but I would like to try it with cut and buff first. I have 4 layers btw.If you have 3 layers of clear under it, be careful, but flatten it with 1500 grit paper while staying off the edges, then shoot more clear. It shouldn't be a problem.
You should be fine with that as well. I just thought you wanted more clear on it.Yup I’ve done it that way with success before but I would like to try it with cut and buff first. I have 4 layers btw.
Yes I experienced the downfalls already on one panel lol.From my personal experience, proceed with caution.