R
rayfrausto
Hi you guys I don't no if this is the right section to post so if it isn't my apologies. Well I just wanted to introduce myself and ask a couple questions. I've learked on the forum for a little bit, very nice forum and memebers seem really helpfull and intelligent. I just turned 20 last month and I'm new to any autobody and paint. I'm currently in school doing automotive tech. It helps I got two buddies who own a shop and are very helpfull. I'm currently restoring a 68 chevelle that requires some metal work. I have a ls1 motor and tranny ready to drop in once I can get the body stripped and primered. I have a portable blaster that we will use at my buddy shop to blast the body of the car. I've bought two gals of SPI black epoxy and some other things. I stripped down the Fenders and hood and want to coat with two coats and move on to other body parts. Sorry for the rant just wanted to introduce my self.
So ima ask a couple questions maybe you guys put ur opinions.
1) what do you guys use to strip back of panels like Fenders ect. I was planning on spraying 2 coats of epoxy on back sides and calling it done?
2) I was Thinking of buying a compressor for my house. Instead of always going to my buddys house or shop even though most the work be done there. There a used 60 gal 5 HP devilbiss pro 4000 I can get for 225? Is that an okay compressor if I wanted to would I be able to run my sander, maybe do some primering/painting with ?
Thank you Raymond
So ima ask a couple questions maybe you guys put ur opinions.
1) what do you guys use to strip back of panels like Fenders ect. I was planning on spraying 2 coats of epoxy on back sides and calling it done?
2) I was Thinking of buying a compressor for my house. Instead of always going to my buddys house or shop even though most the work be done there. There a used 60 gal 5 HP devilbiss pro 4000 I can get for 225? Is that an okay compressor if I wanted to would I be able to run my sander, maybe do some primering/painting with ?
Thank you Raymond