If you have a sample then any major paint jobber can scan it with their color camera and mix it with the formula the camera gives. The old numbers that you see on sites like paintref.com are outdated because of different systems being used and the removal of lead in toners where there may be a number that corresponds to a modern paint system.
You might want to contact forum member Chad and see if he can mix it in either Wanda or Motobase. Another option is to check with the company that their name is banned here. They have a formulation. Now I would not use this for the actual refinish but instead to do a sprayout with, and if satisfied with the color then take it to a Jobber and have them scan it. Then you would have a formula in a quality basecoat. I know PPG has this color in Omni+, if you have a decent PPG jobber, ask if they can give you the PPG tech/color line. Then ask the Tech on the phone if they can cross the Omni number to DBC. Generally their computer will give a color that is the closest aproximation to the existing formula. Then you could use DBC.
First thing though I would do is talk with Chad and see if he can mix it for you in Wanda or Motobase. Both are excellent quality and cost much less than DBC. He will ship to you.
Southwest Michigans premier paint supply store.
www.autorodtechnologies.com
Other company I mentioned above. They have the color in 4 oz quantity. Get this do a sprayout and use it to get a formula in a quality base at your Jobber.
SHADOW GRAY METALLIC | ****$***** PAINT BASECOAT Our OEM Matched ****$***** Paint Basecoat is a 1:1 Mix ratio with our HR-13XX Series Reducer. Gallon & Quart Variants are Unreduced and need reduced 1:1 with our HR-13XX Series Reducer 4oz Variants are Pre-Reduced with our HR-13XX Series Reducer so it is...
tamcopaint.com