Hi guys, I am looking for some advice on a roadmap to follow while attempting to paint my car. Not just where to start panel wise but with respect to assembly and disassembly, trunk interior, jams and inner doors (parts of which I believe are exterior colors). I’ve done car exteriors only where all interior areas are taped but not a full on resto.
Here is some background information:
1970 Sport Satellite currently in epoxy primer and final stages of blocking and priming.
Plan is to use epoxy primer as final sealer just before I base coat it.
Doors currently off trunk lid off and hood is off.
My initial thought is to hit seal, color and clear the:
jams, trunk interior, trunk lid underside, trunk lid inner deck where the lid seal is also the inner doors and not do the interior other than what ever overspray hits it. Then assemble and tape off interior and get a clean exterior shoot. Is this a good path?
Questions Comments and suggestions appreciated.
Here is some background information:
1970 Sport Satellite currently in epoxy primer and final stages of blocking and priming.
Plan is to use epoxy primer as final sealer just before I base coat it.
Doors currently off trunk lid off and hood is off.
My initial thought is to hit seal, color and clear the:
jams, trunk interior, trunk lid underside, trunk lid inner deck where the lid seal is also the inner doors and not do the interior other than what ever overspray hits it. Then assemble and tape off interior and get a clean exterior shoot. Is this a good path?
Questions Comments and suggestions appreciated.