Toolin
Promoted Users
Okay, my intent was to block and topcoat the rear deck lid. Because the 24-hour unreduced cured epoxy was loading up the paper I decided to scuff the underside and spray single stage on that. That side was epoxy reduced 25% at 48 hours. I wiped with 700 and tacked it with a Datco surgical blue tack rag. I think that is where the problem lies. Ordinarily I completely unfold it and allow it to dry out for 20 minutes or so before re-folding it. This time I unfolded it maybe halfway and immediately refolded it. After that I rested in on the panel for maybe a minute to retrieve the hose and a blow gun to proceed. That is exactly the same area where the fisheyes appeared. Nowhere else. Has anyone had fish eye issues carelessly using a quality tack rag.