I started a new thread on my project cause the other one was getting too long. Anyway,I need some advice on my project. I have been practicing shooting the base on a junk fender. I am getting use on adjusting the gun settings for the base that I will be spraying on my truck. My biggest concern is the roof and the hood,since they are harder to reach. I need to know from you experienced guys if i can do the following. I Was going to remove the hood to paint seperately but decided to leave it on. This is what I am going to try and do.I want to mask off the roof and the hood and spray those 2 with 2 coats each. Than, come back next day and spray the rest of the truck. Now,say that I spray the roof and hood and after the second coat,should I go ahead and shoot the clear after the base flash time,say 30 minutes or can I wait till next day and spray the clear? If I can wait till the next day to shoot the clear,than I will do that and wait one more day to shoot the base on the rest of the panels. I need some help and advice please. I will follow all your recommendations. If I have to shoot the complete truck at the same time,than I need to take more time so that I have all my equipment ready. Thanks to all.