This time I went back to my ProLite. te20 1.3 tip, 1.5 turns out @ 35psi... I was shooting @ 26psi, but just couldn't get it to not run. I may revisit the DV1 clear gun again and bump the pressure up also and see how it goes.
For epoxy - reduced. Again, ProLite te20, 1.3 1.5 turns out @ 24psi. I used to have a lot of separation issues with it and it was so frustrating, but when i back the pressure down it just flowed out really nice.
Overall, the ProLite is probably my favorite gun.